Connector Andrew L4PNM Type-N Male, LDF4-50A

Connector Andrew L4PNM type-N Male, LDF4-50A General Specifications: • Interface : N Male • Body Style : Straight • Brand : HELIAX® | RingFlare™ • Mounting Angle : Straight Electrical Specifications: • Connector Impedance : 50 ohm • Operating Frequency Band : 0 – 8800 MHz • Cable Impedance : 50 ohm • 3rd Order IMD, typical : -120 dBm @ 910 MHz • 3rd Order IMD Test Method : Two + 43 dBm carriers • RF Operating Voltage, maximum ( vrms) : 707.00 V • dc Test Voltage : 2000 V • Outer Contact Resistance, maximum : 0.30 mOhm • Inner Contact Resistance, maximum : 2.00 mOhm • Insulation Resistance, minimum : 5000 MOhm • Average Power : 0.6 kW @ 900 MHz • Peak Power, maximum : 10.00 kW • Insertion Loss, typical : 0.05 dB • Shielding Effectiveness : -130 dB Mechanical Specifications: • Outer Contact Attachment Method : Ring-flare • Inner Contact Attachment Method : Captivated • Outer Contact Plating : Trimetal • Inner Contact Plating : Gold • Attachment Durability : 25 cycles • Interface Durability : 500 cycles • Interface Durability Method : IEC 61169-16: 9.5 • Connector Retention Tensile Force : 890 N | 200 lbf • Connector Retention Torque : 5.42 N-m | 48.00 in lb • Insertion Force : 66.72 N | 15.00 lbf • Insertion Force Method : MIL-C-39012C-3.12, 4.6.9 • Pressurizable : No • Coupling Nut Proof Torque : 19.91 N-m | 176.25 in lb • Coupling Nut Retention Force : 444.82 N | 100.00 lbf • Coupling Nut Retention Force Method : MIL-C-39012C-3.25, 4.6.22 Dimensions: • Nominal Size : 1/ 2 in • Diameter : 22.00 mm | 0.87 in • Length : 76.00 mm | 2.99 in • Weight : 242.00 g | 0.53 lb Environmental Specifications: • Operating Temperature : -55 ° C to + 150 ° C ( -67 ° F to + 302 ° F) • Storage Temperature : -55 ° C to + 85 ° C ( -67 ° F to + 185 ° F) • Immersion Depth : 1 m • Immersion Test Mating : Mated • Immersion Test Method : IEC 60529: 2001, IP68 • Water Jetting Test Mating : Mated • Water Jetting Test Method : IEC 60529: 2001, IP66 • Moisture Resistance Test Method : MIL-STD-202F, Method 106F • Mechanical Shock Test Method : MIL-STD-202, Method 213, Test Condition I • Thermal Shock Test Method : MIL-STD-202F, Method 107G, Test Condition A-1, Low Temperature -55 ° C • Vibration Test Method : MIL-STD-202F, Method 204D, Test Condition B • Corrosion Test Method : MIL-STD-1344A, Method 1001.1, Test Condition A