HT Alinco DJ-V17

SPECIFICATIONS - HT Alinco DJ-V17 General Frequency range: DJ-V17 / S17 T: TX144 - 147.995MHz RX130 - 173.995MHz E: TX/ RX 144 - 145.995MHz Modulation: F3E ( FM) Frequency step: 5, 10, 12.5, 15, 20, 25, 30kHz step Memory channel: 200 channels + 1 call channel + 1 Repeater-Access parameter memory Antenna impedance: 50ohm unbalanced Frequency stability: DJ-V17 / S17: + / - 5ppm Supply voltage: DC 7.0 - 16.0V ( EXT DC-IN) Current consumption: ( Typical value) TX at High power V/ S17 1.4A, V27T 1.6A, V/ S47 1.7A RX at 500mW AF out: 250mA Stand-by: V/ S17 70mA, V27T 80mA, V/ S47 80mA Battery-save ON: average 26mA Temperature range: Unit -10digC to 60digC ( + 14digF to + 140digF) Battery packs: -10digC to + 45digC ( + 14digF to + 113digF) Ground: Negative Dimensions: 58( W) x110( H) x36.4( D) mm ( 2.28 " ( W) x4.33 " ( H) x1.43 " ( D) ) with EBP-65N w/ o projection Weight: Approx.280g ( 9.9oz) with EBP-65N & antenna Transmitter Power output: ( Approx.value) V/ S17: 5W ( with EBP-65N) 5W ( with DC 13.8V) 0.8W ( LOW output) V27T: 5W ( with EBP-65N) 5W ( with DC 13.8V) 0.8W ( LOW output) V/ S47: 4.5W ( with EBP-65N) 5W ( with DC 13.8V) 0.8W ( LOW output) Modulation: Variable reactance Spurious emission: -60dB or less Max. deviation: + / - 5KHz Mic. impedance: 2Kohm Receiver System: Double-conversion super heterodyne Sensitivity: -14.0dBu ( 0.2uV) or less Intermediate frequency: DJ-V/ S17: 1st IF 21.7MHz 2nd IF 450kHz Selectivity: -6dB: 12kHz or more -60dB: 26kHz or less AF output: 500mW ( MAX) / 400mW ( 8ohm, 10% distortion)